Care And Maintenance - MELICONI HP400 Mode D'emploi

All manuals and user guides at all-guides.com
To avoid damaging the product, observe the following instructions:
- Prevent any liquids from entering the transmitter or receiver.
- Disconnect the power supply before cleaning the transmitter
- Use a damp cloth to clean the outside of the device; do not use detergents or solvents, and do not attempt to
dismantle the device.
PROBLEM
No audio
Audio in one earpiece only
The sound is distorted
• this instruction manual contains all the information necessary to resolve most problems that may affect the
device.
• visit our website www.meliconi.com
If you require any additional information or assistance, email us at cuffi e@meliconi.it
16

Care and maintenance

Troubleshooting
SOLUTION
- Check that the headphones are connected correctly
- Check that all the jack connectors are inserted correctly, including
the power supply in the wall socket.
- Check that the audio cable is connected correctly to the TV or
other audio source
- Check the receiver volume setting.
- Check that the audio source volume level is suffi cient.
- Make sure that there are no obstacles blocking the line of sight
between the transmitter and the receiver.
Check that both the earpieces have been connected correctly.
The receiver battery is fl at. Replace the receiver on the transmitter
base in order to recharge it.
Help line
If you have any questions about the HP400: