Vicks Kaz V977N-CAN Mode D'emploi page 10

V977N OM.qxd 8/10/06
8. Error Messages (Continued)
Display / Problem
9. MemoryTracker ™ Mode
Use the following steps to recall the last 12 temperature measurements.
Display
Pressing and releasing the Start
resume the above sequence from reading 1.
5:43 PM Page 10
Display Meaning
Blank display Please check if the battery
has been loaded correctly.
Also check polarity (<+> and
<–>) of batteries.
Dead battery indication If the steady battery icon
is the only symbol shown
on the display, the battery
should be replaced immediately.
Display Meaning
Recall Mode
Reading 1
(the last reading)
Reading 2
(the second latest
reading)
Reading 12
(the last reading)
button after the last 12 readings have been recalled will
10
Possible cause and remedy
Description
Press the button to enter m
Recall Mode when power is off.
The memory icon «M» flashes.
Press and release the m
button to recall the last reading.
The number 1 will appear show-
ing the last saved reading.
Press and release the button m
to recall the second latest
reading.
Press and release the button m
consecutively to recall readings
in succession, up to the last 12
readings.