weBoost Destination RV Guide D'installation page 6

(STEP 2 cont .)
Clean surface of RV where wall mounts
will attach and remove the adhesive
backer on both the upper and lower
wall mounts .
NOTE: The wall mounts must be attached
for the first-time setup of the
Destination RV .
Slide ground mount on bottom of pole
and firmly attach the upper wall mount
to the RV, then attach the lower wall
mount.
IMPORTANT: Wall mounts must be
applied to a clean and smooth surface .
Press firmly and let it cure for at least
20 minutes .
4 ENGLISH
remove adhesive
backer
press firmly
attach to side
of RV
attach to side
of RV
Ground
Mount