Breville the All In One BSB530XL Livret D'instructions page 16

TO USE THE VARIABLE
MASHING LEG
For food preparation tips and recipes refer
to the recipes section. Ensure the variable
mashing leg is completely and properly
assembled.
1. Place food to be mashed into a blending jug
or a sufficiently large mixing bowl
or container.
2. Insert the plug into a 110/120V power
outlet.
3. Select the desired setting on the variable
mashing leg.
4. Select a high speed on the speed control
dial of the motor.
5. Place the variable mashing leg into
ingredients and press the trigger switch to
turn the mashing leg on.
6. Move the mashing leg through the
ingredients with a gentle raising and
lowering action until desired texture is
achieved.
7. Turn the motor off by releasing the trigger
switch before lifting the mashing leg out of
the bowl and remove the power plug.
TO DETACH THE VARIABLE
MASHING LEG
Ensure the trigger switch is released and the
appliance is unplugged.
Hold the motor body with one hand, and, using
thumb and finger of the other hand, press on
the two EJECT buttons on either side of the
motor body. Pull the motor body away from the
mashing leg to detach.
16
BSB530XL_IB_C16.indd 16
RECOMMENDATIONS WHEN USING
WITH THE VARIABLE MASHING LEG
• Release the trigger switch and ensure the
mashing leg has completely stopped turning
before removing the mashing leg from the
food during operation.
• Place the mixing bowl on a damp cloth
during mashing. This will keep the mixing
bowl stable.
USING AS A WHISK
Remove blending leg from motor body (follow
the instructions "To detach the blending leg").
Align the top end of the whisk gearbox with
the corresponding end of the motor body and
push until the gearbox clicks into place. Align
the shaft of the whisk with the hole in the
gearbox and push until the whisk clicks and
locks into place.
7/11/2016 1:45 PM