General Description - WAGNER MICRO HEAT TOOL Guide D'utilisation

GENERAL DESCRIPTION

The Wagner Heat Tool is a useful tool with a wide range of household project applications.
Like any other power tool, the Heat Tool can be dangerous when misused. Read the following
instructions carefully and follow all safety precautions. It is the responsibility of the owner to use
the Heat Tool properly.
SPECIFICATIONS
Wattage 350 Watts on high, 170 Watts on low. Operates on 110-120 VAC
Heat Output Approximately 680°F on high, approximately 450°F on low
Weight 0.7 pounds
Cord 18 gauge 2 wire, 6 feet long
Safety Double insulated to minimize electrical risk
USES
• Activate embossing powder and liquid applique for craft use
• Shrink tubing for electrical work
• Soften paint, caulking and putty for easier removal
• Soften adhesives to help remove stickers and floor tiles
• Shrink plastic film for crafts, and small gifts
For more details on multiple projects and 'how to' videos please visit:
www.wagnerspraytech.com.
DOUBLE-INSULATED PRODUCT
In a double-insulated product, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated product, nor
should a means for grounding be added to the product. Servicing of a double-
insulated product requires extreme care and knowledge of the system, and
should be done only by qualified service personnel. Replacement parts for a
double-insulated product must be identical to those parts in the product.
COMPLIANCE
Conforms to UL STD 499
Certified to CSA STD C22.2 No. 60335-1 and 60335-2-45
2
EN
Double-
insulated
5003114