Handicare 2000 Mode D'emploi page 24

EN
Problem: the lift travels in one direction only and the display shows a "4/6".
Cause: there is an obstacle between the lift and the stairs.
Solution: move the lift in the opposite direction {A} and remove the obstacle {B}.
Problem: If the lift is not moving in either direction, there is no code on the
diagnostic display
Cause: The lift may be switched off
Solution: Turn the lift on.
22 | USER MANUAL
C A U S E
C A U S E
B
S O L U T I O N
S O L U T I O N
.
OBSTACLE
A
SWITCH