Display Of The Internal Software Version; Showing Of Display Segments; General Specifications; Dimensions And Weight - PCE Instruments F 09 Notice De Fonctionnement

3.12.13 Display of the internal software version

Hold the HOLD key pressed and bring the rotary switch
from the OFF position to the A position .
The unit beeps, the software version is displayed in the form
UX.XX for 2 seconds, then all the segments of the display
are shown as long as the HOLD key is pressed.

3.12.14 Showing of display segments

See § 03.12.13. It is usually possible for any key-switch
combination not described previously.

4. GENERAL SPECIFICATIONS

4.1 Dimensions and weight

70 x 193 x 37 mm
I I

4.2 Clamp Tightening Capacity

≤ 26 mm
I

4.3 Power supply

a standard 9 V alkaline battery (type CEI 6LF22, 6LR61 or
I
NEDA 1604). To change it, see §7.1.
Average battery charge life: 60 h or 20,000 x 10 s
I
measurements
Battery charge indicator
I
Flashing: charge life < 1 h
Fixed: Change battery
Automatic OFF after 10 minutes with no action on the switch
I
or the keys (reactivation by switching from the OFF position
of the switch or by actuating any key)

4.4 Environmental parameters

Temperature - Humidity
I
90
80
70
60
Ž
50
40
30
20
10
0
-50 -40 -30 -20 -10 0 10
Temperature in °C
Œ
Reference range
Ž
Storage range (without battery)
Altitude
I I I I I
- Operation: ≤ 2000 m
- Storage ≤ 12,000 m
260 g
:
+
-

Œ Ž
20 30 40 50 60 70 80 90

Operating range
41