Senix CSP4QL-L Manuel De L'opérateur page 2

This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
To reduce the risk of injury, user must read
instruction manual.
Thrown objects and loud noise can cause
severe eye injury and hearing loss. Wear
eye protection meeting current ANSI Z87.1
standards and ear protection when operating
this unit. Wear head protection when
operating this unit. Fallen objects can cause
severe head injury. Use a full face shield
when needed.
Wear hand protection.
Wear non-slip safety footwear.
Failure to keep your hands away from the
blade will result in serious personal injury
Avoid power lines, use in dry conditions
Do not expose to rain.
DANGER!
Risk of electrocution!
Indicates danger, warning or caution.
Precautions that involve your safety
The chain must be continously coated with
oil to function correctly. Verify oil level before
each use.
2
• SAFETY & INTERNATIONAL SYMBOLS •
Contact of the guide bar tip with any object
should be avoided.
Tip contact can cause the guide bar to to
move suddenly upward and backward, which
can cause serious injury.
Always use two hands when voperating the
pole saw.
DO NOT USE E85 FUEL IN THIS UNIT
CAUTION: It has been proven that fuel
containing greater than 10% ethanol will
likely damage this engine and void the
warranty.
Always use clean, fresh unleaded fuel. Refer
to operator's manual for the proper type of
oil.
Hot surface. Do not touch a hot muffler or
cylinder. You may get burned. These parts
get extremely hot from operation. They
remain hot for a short time after the unit is
turned off.
72dB(A)
Bystander sound pressure level: 72dB(A)
(15M)
MEASURED AT 50FT.
PER ANSI B175.3
Thrown objects can ricochet and result in
personal injury or property damage.
Keep all bystanders at least 50 ft. away.
WWW.SENIXTOOLS.COM