Bushnell DISCOVERER 78-8970 Manuel D'instructions page 14

(NOTE: Make certain that the telescope is set up on a level surface.)
step 1:
Before turning the telescope on, remove the remote control handset. When you turn the telescope on, a spoken and scrolling
message will occur:
BUSHNELL DISCOVERER Vx.x
Then the default menu will appear:
SELECT MODE
ALIGN STAR
The ALIGN STAR option is flashing.
Press ENTER to choose ALIGN STAR option.
NOTE: ANY FLASHING ITEM ON THE DISPLAY IS A MENU CHOICE. OTHER CHOICES ARE AVAILABLE BY
USING THE SCROLL UP OR SCROLL DOWN BUTTONS.
A scrolling message indicates to CENTER STAR 1 THEN PRESS ENTER
To center your first guide star, simply choose a star that you know from the list on the screen. Repeat for Star 2.
After this step is completed, you will see a display that reads:
ALIGN COMPLETE
RATING *****
(Note: The more stars that appear on the second line of the display the better, up to 5)
After ALIGN STAR, the display will then read:
SELECT MODE
EXPLORE
Select EXPLORE by pressing ENTER. SCROLL UP and DOWN to see what flashing menu choices you have. Choose
PLANET. These are the most interesting. Even if you are a first time telescope user, PLANET objects can be very
exciting.
Press ENTER when the display reads:
EXPLORE
PLANET
This will take you into a list of named PLANET objects. By using the SCROLL UP or SCROLL DOWN buttons, you can explore
several items in the object list.
PLANET
JUPITER
Press ENTER to choose the PLANET you wish to view. The display will then be:
PLANET
3 5
120 52 JUPITER
1
m
ALIgNINg DIScOverer FOr The FIrST TIme
56
m
uSINg DIScOverer FOr The FIrST TIme
56
56