Submersible Pump - E-Tech ED 5 Instructions Pour L'utilisation

Submersible pump

ED, EDV
ORIGINAL OPERATING INSTRUCTIONS
S FETY
Read these instructions carefully before in-
stalling or using the device.
The assembler and final user must carefully com-
ply with all applicable standards and laws, inclu-
ding local regulations. The manufacturer declines
any liability in the event of damage due to impro-
per use or use under conditions other than those
indicated on the serial plate and in these instruc-
tions. The device has been built in conformity
with the current European Community laws.
Rated power
Head
Delivery
Pump type
XXXXXXX
Q min/max X/X m
H max/min X/X m
X kW (XHp)
S.F.
220∆/380Y V3~50Hz
X/X A
XXXXXXXX
Operation Duty - Insulation class - Weight
Notes
Nom. motor current
Tension nominale - n° de phases - Fréquence
1. Pump designation
See designation on the pump name-plate or on
the bar-code label.
Meaning of the designations:
ED = Stainless steel pump.
V = With free-flow (vortex) impeller.
T = With three-phase motor (without
indication = with single-phase motor).
2. Operating conditions
Standard construction
- For clean and dirty water, also containing solids
with maximum size 35 mm.
With a high solid content or with filamentous par
ticles use only the free-flow (vortex) EDV.
6
Rotation speed rpm
Protection
Serial number
Certifications
Made in Italy
XXXXXXX
/h
3
XX
IP
n XXXX/min
cosø X
S1 l.cl. X X kg
Power factor
- Maximum liquid temperature: 35 °C.
- Maximum liquid density: 1100 kg/m
- Minimum dimensions of installation pit:
0.55x0.55m; depth 0.5 m.
- Minimum immersion depth see also sections
3.1., 3.3.
- Maximum submersion depth 5 m.
- Maximum starts/hour: 30 at regular intervals.
Sound pressure at minimum immersion depth:
< 70 dB (A).
Noise disappears when the pump is submersed.
Do not use in garden ponds, tanks or
swimming pools when people are in the
water.
The Pump
explosive or flammable environments.
3. Installation
The internal diameter of the delivery pipe must
never be smaller than the diameter of the pump
connection port: G 1 1
ATTENTION: The pump must be lifted and
transported using the handle fitted for this purpose
and not pulled by the electrical power cable.
Place the pump, with vertical axis, at the bottom
of the pit or at the site of installation.
3.1. Stationary installation
On
Off
h
max
h
min
mm
h h
TYPE
max min
EDV 5
508 248
EDV 7
533 273
EDV 9
533 273
.
3
cannot be used
/ (DN 40).
2
min 550 x 550
mm
h
TYPE
max
ED 5
508
ED 9 533
in
h
min
248
273