Using An Sd Card - Celestron LCD Digital Microscope II Guide De Démarrage Rapide

SPECIFICATIONS
Mechanical
3.5" x 3.5" (88mm x 88mm)
Stage
5 MP CMOS; 10x Magnifi cation in lieu of an eyepiece;
Digital Camera
3072 x 1728 pixel array
3.5" with 4x Digital Zoom – High defi nition digital TFT display
LCD Monitor Resolution – 320 x 240 pixels, Contrast ratio – 350,
Color Support – 262K colors, Brightness/Luminance – 400cd/m2
Focuser Smooth, single motion
SD card slot, supports up to 32GB card - 2GB SD card included
Memory
(1,250 snapshots at 5MP, 40 minutes of SD video)
USB Cable 1.5 m long, 2.0 USB
Filter Wheel 6 Position- Red, Blue, Green and 1, 3, 6mm DIA aperature
3 Position with click stop
Nosepiece
Illumination Upper and lower, built-in adjustable LEDs
Condenser N.A. 0.65
AC Adapter Input Universal 100 to 240Volt 50/60HZ
Weight/
56.44 oz/1600 g
Dimensions
Batteries 4AA (User supplied- up to 3 hours of use)
SETTING UP YOUR MICROSCOPE
1. Remove the carrying case from the shipping box.
2. Unzip the case, and carefully remove the microscope and other parts and set them on on a fl at surface.
3. Insert the cylindrical plug on the end of the AC adapter into the socket on the back of the microscope
(Figure 2) and then connect the plug end of the AC adapter into a proper power outlet as shown
in Figure 3.
Note: The AC Adapter's plug is interchangeable for use around the world. Switch easily among USA, UK
and EU style plugs.
To change the plug, push down and hold the small button release (circled in Figure 4). Grasp the plug
prongs with your free hand and rotate the plug head counterclockwise 90° to release. Reverse the
procedure with your chosen plug head. When the new plug head is secured in place, you will hear a click.
Battery Operation — You can use your microscope without AC power if you choose. This gives you the
freedom to operate the microscope outdoors or indoors anywhere you please. You'll need 4 AA batteries
(user supplied). Open the battery door on the bottom of the microscope and insert the batteries according
to the battery polarity shown in the battery compartment. After the batteries are installed, close the battery
door. Battery life will typically be three hours.

USING AN SD CARD

The LCD Digital Microscope II comes with a 2GB SD card, which you can use to capture images (snapshot or video). SD cards are inserted into
the SD card slot in the LCD monitor (Figure 1).
Product design and specifi cations are subject to change without prior notifi cation. This product is designed and intended for use by those 14
years of age and older.
© 2019 Celestron • All rights reserved • celestron.com/pages/technical-support • 2835 Columbia Street • Torrance, CA 90503 USA • 10-19
celestron.com/support/warranties
MAGNIFICATION (POWER) MAGNIFICATION (POWER)
Use the following table to determine the magnifi cation Use the following table to determine the magnifi cation
power power combinations combinations you you
LCD Digital Microscope II. LCD Digital Microscope II.
Objective Lens 4x
Magnifi cation of
image on screen 40x
Maximum with 4x
digital zoom feature 160x
WORKING DISTANCE WORKING DISTANCE
Objective Lens Objective Lens Objective Lens 4x 4x 4x
Working Working
Distance (mm) - est. Distance (mm) - est. Distance (mm) - est. 35.3 35.3 35.3
Fig 2
Fig 3
Fig 4
can can achieve achieve with with the the
10x 40x
100x 400x
400x 1600x
10x 10x 10x 40x 40x 40x
7.8 7.8 7.8 0.7 0.7 0.7
2
ENGLISH I