BATTERY PACK AND CHARGER
CHARGER LEDS
■ If the battery is not inserted into the charger, a continuous red LED light indicates that the outlet
plug is plugged into an outlet socket and the battery charger is ready for operation.
■ Charging: a flashing green LED on the charger indicates that the battery is charging normally.
■ Charged: continuous green LED on the charger indicates that the battery is ready for use.
■ Technical Issue: a flashing red LED light on the charger indicates that battery pack has a
charging problem or might be defective.
- One possible condition is the battery temperature is not within the charging temperature range
of 45°F - 104°F or the charging current is too high. As soon as the permitted temperature and the
charging current ranges are reached, the battery charger will automatically switch to charging.
- If the temperature range and charging current are correct and flashing red LED light continues,
then remove and reinstall the battery pack. If the LED status repeats a second time, try to
charge another identical battery. If the battery charges normally, dispose of the defective battery
pack (see Environmental Safe Battery Disposal section).
- If the flashing red light continues after installing the second battery, the charger may be defective.
Replace with a new one.
■ After continuous or repeated charging cycles without interruption, the charger may warm up.
This is normal and does not indicate a technical defect of the battery charger.
The indicator lights on the charger show the charger status:
SYMBOL
BATTERY LED PANEL
■ The panel consists of 2 LEDs on the battery. Press and
release the button, the LEDs will show you the charge levels.
■ The battery's charge level can be checked either when
the battery is attached on the machine or removed from
the machine.
INDICATOR LIGHTS
Red, continuous
Green, blinking
Green, continuous
Red, blinking
Connected to power supply
12
STATUS
Charging
Fully charged
Charging problem:
See Technical Issue
Power Indicator
Button