Battery And Charger; Battery Charging - LawnMaster CLBL6015A Mode D'emploi

ASSEMBLY
A - Concentrator Nozzle
B - Blower Tube
C - Cordless Blower
1
A
2
FOR BLOWING (See Figure 3)
Insert the widest end to the blower tube into the front opening on the blower and turn clockwise to lock into
place.
Then insert the Concentrator Nozzle into the blower tube and turn clockwise to lock into place.
BATTERY PACK AND CHARGER

BATTERY CHARGING

■ Use only with 60V LawnMaster
designed for the Lithium-Ion battery used in this tool.
■ Check the power voltage! Battery chargers operate on 120 V.
■ The battery is charged between 45°F and 104°F. This ensures an optimum battery service life.
■ Protect the battery from heat, from continuous exposure to sun and keep away from radiation or
other heat sources. Do not leave the battery in the tool in direct sunlight over long periods.
■ The battery is supplied partially charged. To ensure full capacity of the battery, charge the battery
before using your tool for the first time. The Lithium-Ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure does not affect the battery.
■ Always leave it fully charged if kept in the charger for storage.
B
®
battery chargers. The battery charger supplied is specifically
C
1
2
11
Fig 3