LawnMaster CLBL6015A Mode D'emploi page 10

ASSEMBLY
60V Max* 2.0 Ah Lithium-Ion Battery
Battery Pack
Release Button
TO INSTALL (See Figure 2)
■ Align the tongue of the battery pack with the cavity in the blower housing.
■ Grasp the blower firmly.
■ Push the battery pack into the handle until the latch locks into place.
■ Do not use force when inserting the battery pack. It should slide into position and "click".
WARNING
Follow these instructions in order to avoid injury and to reduce the risk of electric
shock or fire:
■ Replace the battery pack or the charger immediately if the battery case or charger cord is damaged.
■ Verify that the switch is in the OFF position before inserting or removing the battery pack.
■ Verify that the battery pack is removed and the switch is in the OFF position before inspecting,
adjusting, or performing maintenance on any part of the blower.
■ Read, understand, and follow the instructions contained in the section entitled Battery Charging
Procedure.
10
Fig 2