Brandt FC405ME Manuel D'instruction page 31

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5. "Maintien au chaud" (Keep warm) function
Press the pad "MAINTIEN AU CHAUD" to select directly the "Keep warm" programme.
Press
, then set the time by pressing the pads "+" and "-", the timer will change
each time you press these pads. Pressing and holding the pad allow changing the time
more rapidly.
Press
, the recorded temperature is by default 600°C. It can be adjusted from
60°C to 80°C.
Press "DEPART" (Start) after closing the door. When the programme is finished, the
appliance will emit a continuous beep.
6. "Toast" function
The "Toast" function includes programmes for toasting. It can also be used for browning
foods.
Press the pad "TOAST" to select directly the "Toast" programme.
Remove the baking tray. Place the wire rack in the position of the middle in the oven and
spread the bread on the wire rack.
To select the desired toast colour, press the pads "+" and "-". The average value by
default (2) appears in the screen. To obtain a darker bread, press the pad "+" until the
position (3), but if you want a bread which is less dark, press the pad "-" until the
position (1).
Press "DEPART" (Start) after closing the door, the timer will begin its countdown. When
the programme is finished, the appliance will emit a continuous beep.
7. "Pizza" function
Press the pad "PIZZA" to select directly the "Pizza" programme.
Press
, then set the time by pressing the pads "+" and "-", the timer will change
each time you press these pads. Pressing and holding the pad allow changing the time
more rapidly.
The "Pizza" function uses a fixed temperature of 220°C, no adjustment is needed.
Open the door and place the pizza in the oven and press on "DEPART" (Start) after
closing the door. When the programme is finished, the appliance will emit a continuous
beep.
8. "Décongélation" (Defrost) function
Press the pad "DECONGELATION" to select directly the "Defrost" programme.
Press
, then set the time by pressing the pads "+" and "-", the timer will change
each time you press these pads. Pressing and holding the pad allow changing the time
more rapidly by steps of 10 minutes. The temperature by default is 60°C.
31

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Fc405mebFc405mesFc405mew

Table des Matières