Brandt FC405ME Manuel D'instruction page 30

4. "Tournebroche" (Rotisserie) function
•
Press four times the pad "MODE DE CUISSON" to select the "Tournebroche"
(Rotisserie) programme.
•
Press , then set the time by pressing the pads "+" and "-", the timer will change
each time you press these pads. Pressing and holding the pad allow changing the time
more rapidly.
•
Press , the recorded temperature is by default 230°C. It can be adjusted from
60°C to 250°C, to modify this temperature press the pads "+" and "-" until the desired
temperature.
•
Open the door and place the food onto the rotisserie fork and ensure that it is securely
attached in the oven cavity.
•
Slide the baking tray into the lower position to catch any fat, then press "DEPART"
(Start) after closing the door. When the programme is finished, the appliance will emit a
continuous beep.
This function allows even cooking, use with Rotisserie Forks.
2. Install the rotisserie
Fit the rotisserie forks in the
rotisserie holes and then
install the drip pan under the
rotisserie
Left
3. Remove the rotisserie
Use the rotisserie handle to remove
the rotisserie forks from the rotisserie
tray and then remove it from the
rotisserie hole
30
1. Install the rotisserie forks
To operate, the rotisserie must be
positioned on the correct side: with the
small hook on the left side of the oven
Rotisserie handle
To avoid the possibility of
a burn, always use the
rotisserie handle to remove
the rotisserie from the
oven
Right