ION KEYSTONE Guide D'utilisation Rapide page 4

Bluetooth Connecting with Keystone
1. Power on each Keystone by pressing their power buttons. You will hear "Power On" for
confirmation. *
2. The speakers will automatically, wirelessly link for stereo sound. The speakers will search
for each other while playing an intermittent tone. Once the stereo pair is successfully
linked, you will hear "Pairing successful, connected" followed by "Left channel" and "Right
channel" on the respective speakers. *
This process may take up to 2 minutes the first time two speakers are linked. Speakers
that were previously linked will relink automatically in a few seconds if powered on in range
of one another.
Note: Keystone speakers should be within 30 ft. (9 m) of each other to Link properly.
3. When the stereo link is confirmed by the solid green LED, press the Bluetooth Connect
button on either speaker or the included remote to enter Bluetooth Pairing Mode.
Note: The Left channel will be the "master" speaker, and the unit from which the Bluetooth
range will be determined.
4. On your Bluetooth device, navigate to your Bluetooth settings menu, find Keystone, and
connect. Once the Bluetooth connection is made, the blue LED will be solid. You will hear
"Connected" for confirmation. *
Note: If you experience trouble in connecting, select "Forget this Device" for Keystone on
your Bluetooth device and try to connect again.
5. If your Bluetooth device is not able to connect to Keystone, hold the Bluetooth Connect
button on the speaker to break previous Bluetooth connections and reset the Bluetooth
module.
* Tip: If you would like to disable (or enable) the voice prompts, press and hold the
Play/Pause button on the remote for 3 seconds.
5