Capital GAUJA M54R Guide Utilisateur page 37

Initializing TPM
On the first run of the program you will need to initialize the TPM.
1. Run the application from the Security Manager shortcut on the desktop, or from the TPM
Secure Tools item in the Start > Programs/All Programs menu.
2. If the Wizard does not appear click Initialize Owner, and then click Next.
3. Type a TPM Owner Password, and then retype to confirm the password.
4. Click Next > Next to begin the owner initialization process.
5. Click Finish to start the user Initialization process.
6. Click Next.
7. Type a TPM User Password, and then retype to confirm the password.
8. Click Next > Next to begin the user initialization process.
9. Click Finish.
10. Enter the user password and click Logon (click Logon in the top menu to log on at any time).
Concise User's Guide
Password Warning
Do not lose the pass-
word, as you will required
to clear the TPM imfor-
mation before use. This
could then result in data
loss.
Recovery Token
Note the location of the
emergency recovery to-
ken. It is recommended
that you save the file to
removable media such
as a USB Flash drive (or
backup using the tool
provided).
TPM User Initializa-
tion & Logon
TPM (Trusted Platform Module) - 31
Figure 15