Capital GAUJA M54R Guide Utilisateur page 34

Concise User's Guide
BisonCap/VideoView
The BisonCap (for 300K and 1.3M pixel cameras) and
VideoView (for 2.0M pixel camera) applications are vid-
eo viewers useful for general purpose video viewing and
testing, and can capture video files to .avi format.
1. Run the BisonCap/VideoView program from the Start >
Programs/All Programs > BisonCam/USB2.0 PC Cam-
era menu (it is recommended that you Set Capture File
from the File menu).
2. Go to the Capture menu heading and select Start
*
Capture (see note below for BisonCap only).
3. Click OK to start capturing the video, and press Esc to
stop the capture.
4. If you wish to, you may go to the File menu and select
Save Captured Video As..., choose a file name and
location, and then click Open (you can view the file using
the Windows Media Player).
*Note: On the first run of the BisonCap program (if you have
not set the captured file) you will be asked to choose a file
name and size for the captured file. Click Start Capture again.
28 - PC Camera
PC Camera Audio Setup
If you wish to capture video & audio with your camera,
it is necessary to setup the audio recording options in
Windows.
1. Click Start, and click Control Panel (or point to Settings
and click Control Panel).
2. Click Sound (Hardware and Sound).
3. Click Recording (tab).
4. Right-click Microphone (Realtek High Definition Audio)
and make sure the item is not disabled.
5. Double-click Microphone (or select Properties from the
right-click menu).
6. Click Levels (tab), and adjust the Microphone and
Microphone Boost sliders to the level required.
7. Click OK and close the control panels.
8. Run the BisonCap/VideoView program from the Start >
Programs/All Programs > BisonCam/USB2.0 PC
Camera menu.
9. Go to the Devices menu heading and select Microphone
(Realtek....) (it should have a tick alongside it).
10. Go to the Capture menu heading and select Capture
Audio (it should have a tick alongside it).