Zoom (VideoView for 2.0M Pixel Camera only)
If you have enabled digital zoom when installing the
2.0M Pixel Camera driver you may use the Options >
Setting menu to zoom the camera in and out.
1. Run the VideoView program.
2. Go to Options and scroll down to select Setting.
3. Use the slider to adjust the zoom level, and click OK to
save the setting.
Figure 14 - Setting
Snapshot (VideoView for 2.0M Pixel Camera
only)
You can capture still images by using the SnapShot
command from the Capture menu.
1. Run the VideoView program.
2. Go to Capture and select SnapShot.
3. The picture (in JPEG format) will be placed in the
Snapshot folder (do not move or rename the folder) on
the desktop.
Eliminating Screen Flicker
If you find that the video screen in the BisonCap/Video-
View program is flickering, you can try to adjust the set-
ting in the Video Capture Filter options.
For BisonCap:
1.
Run the BisonCap program.
2.
Go to Options and scroll down to select Video Capture
Filter....
3.
Click either 50Hz or 60Hz under Frequency in Property
Page (tab).
For VideoView:
1.
Run the VideoView program.
2.
Go to Options and scroll down to select Video Capture
Filter....
3.
Click either 50Hz or 60Hz under Flickering Reduction in
Image (tab).
Concise User's Guide
PC Camera - 29