Wireless Lan Module - Capital GAUJA M54R Guide Utilisateur

Wireless LAN Module

Power Toggle for the Wireless LAN Module
Enable power to the Wireless LAN module by using the
Fn + F11 key combination. When the Wireless LAN mod-
ule is powered on, the
cator will briefly be displayed.
Intel WLAN
1. Make sure the module is powered on..
2. Click Install Option Drivers (button).
3. Click 1.Install WLAN Driver > Yes.
4. Click Install Software.
5. Click the button to accept the license agreement, and
then click Next.
6. Click Next > OK.
802.11 b/g USB WLAN
1. Make sure the module is powered on.
2. Click Install Option Drivers (button).
3. Click 1.Install WLAN Driver > Yes.
4. Click Finish to complete the installation.
LED will be green and the indi-
Note: The operating system is the default setting for
Wireless LAN control in Windows Vista.
Connecting to a Wireless Network
Make sure the Wireless LAN module is turned on.
1. Click the taskbar wireless icon
to a network (or right-click the icon
Connect to a network).
2. In the Show list, click to choose Wireless from the drop-
down menu.
3. A list of currently available networks will appear.
4. Click a network, and then click Connect.
5. If you do not see a network you want to connect to, click
Set up a connection or network (a list of options will
appear allowing manual searching, and creating a new
network).
6. Move the cursor over the taskbar icon
connection status (see below).
7. To disconnect from the wireless network you can click the
taskbar wireless icon
disconnect to access the network menu, and click
Disconnect (or right-click the icon
Disconnect from).
Concise User's Guide
, and then click Connect
, and then click
to see the
, and then select Connect or
, and then click
Driver Installation - 25