Operation-Basic; Initial Setup - Rockford Fosgate RFX Serie Installation Et Fonctionnement

5. OPEN – Opens the faceplate and ejects CDs from the in-dash CD player.
6. VOLUME – When pressed, selects between VOLUME, BASS, TREBLE, BALANCE, and FADER
modes.
7. 0 (PUNCH) – Enables bass and treble response to be boosted at all volume levels.
8. 9 (AS) – Press and hold to store the strongest radio stations in each tuner bank in AUTO STORE
mode. Momentarily press to scan each radio preset in PRESET SCAN mode.
9. – Press to remove faceplate from source unit.
10. 8 (LO/DX) – When pressed, selects between LOCAL and DX tuner sensitivity.
11. DIR- – Selects the previous radio station in TUNER mode and selects the previous track in
CDP mode. Moves forward through files in MP3 mode.
12. BAND (ENTER) – Selects which bank of tuner presets (FM1/FM2/AM) should be active or
enables tracks in MP3 mode.
13. PRESET 1 (SCAN) – Selects radio preset #1 in TUNER mode and scans each track on the disc in
CDP mode or MP3 mode.
14. PRESET 2 (RPT) – Selects radio preset #2 in TUNER mode and repeats the current track in CDP
mode or MP3 mode.
15. PRESET 3 (RDM) – Selects radio preset #3 in TUNER mode and selects tracks at random in CDP
mode or MP3 mode.
16. PRESET 4 (T/-10) – Selects radio preset #4 in TUNER mode and jumps back 10 tracks during
MP3 play.
17. PRESET 5 (T/+10) – Selects radio preset #5 in TUNER mode and jumps forward 10 tracks during
MP3 play.
18. PRESET 6 (ROOT) – Selects radio preset #6 in TUNER mode and returns unit to root directory in
MP3 mode.
19. 7 (MUTE) – Mutes the audio in TUNER mode, and pauses the disc in CDP mode or MP3 mode.
20. T-ACC – Tuner mode, source unit, press to access preset buttons 7 to 10. CDP mode, allows you
to enter the track number you want manually .

INITIAL SETUP

DETACHABLE FACEPLATE
The faceplate is detachable as a theft deterrent.
To Detach the Faceplate:
1. Make sure that the faceplate is in the closed position.
NOTE: The faceplate cannot be removed from the faceplate bracket when
the bracket is in the open position.
2. Press the release button on the right edge of the faceplate and pull the
faceplate away from the unit.
To Attach the Faceplate
1. Insert the left side of the faceplate into the faceplate bracket first.
2. Press the right side, (Push Area), of the faceplate against the front of the unit until it clicks into
place.
CAUTION: Do not attempt to attach the faceplate to the faceplate bracket when the
!
bracket is in the open position. You may cause damage to the
mechanism that may void your warranty
S U F
OURCE NIT EATURES
O – B
PERATION
Push Area
ASIC
9