Chicco MyFit Manuel D'installation page 4

SOFTGOODS INSTALLATION:
Place the Backrest Seat Pad onto the Child Restraint.
1
Tuck the fabric into the groove gently around the
3
Child Restraint. Repeat for the other side. Hook BOTH
elastic straps onto the back of the Child Restraint.
Hook the Armrest fabric loop onto the side hook
5
located near the vehicle belt path. Repeat this step for
the other side.
Tuck the fabric into the groove at the top of the
7
headrest. Push down gently on both of the plastic tabs
at the top of the Headrest until they snap into the grooves.
Hook the elastic strap onto the side hook and the
2
top hook located near the vehicle belt path. Repeat for
the other side.
Slide the Armrest Fabric onto the armrest then snap
4
the Armrest Fabric to the Backrest Seat Pad. Repeat this
step for the other Armrest.
Place the Headrest Fabric Pad onto the Headrest.
6
With the Headrest in the highest position, hook the
8
elastic strap onto the BACK of the Headrest. Repeat this
step for the other elastic strap.
4