Télécharger Imprimer la page

Chicco MyFit Manuel D'installation page 2

Masquer les pouces Voir aussi pour MyFit:

Publicité

Les langues disponibles

Les langues disponibles

Pull back gently on both of the plastic tabs at the
7
top of the Headrest and pull up on the Headrest fabric.
Unhook the Armrest fabric loop from the side hook
9
located near the vehicle belt path. Repeat this step for
the other side.
Unhook BOTH elastic straps on the back of the Child
11
Restraint. Pull the fabric out gently from the groove around
the Child Restraint. Repeat for the other side.
Remove the Backrest Seat Pad from the Child Restraint.
13
NEVER use Child Restraint without the Seat Pad.
Remove the Headrest Fabric Pad, as shown.
8
Be careful to not damage the foam insert when
removing the Headrest fabric.
Undo the snap attaching the Armrest Fabric to the
10
Backrest Seat Pad and then remove the Armrest Fabric.
Repeat this step for the other Armrest.
Unhook the elastic strap from the side hook and
12
the top hook located near the vehicle belt path. Repeat
for the other side.
2

Publicité

loading