Assembly Instructions; Preparation - SPORTSTECH SX200 Mode D'emploi

Preparation

• Before assembling make sure that you will have enough space around the item.
• Use the present tooling for assembling.
• Before assembling please check whether all needed parts are available. Under the QR code / link on
the previous page you will find a numbered exploded drawing with all the individual parts that make
up the speed bike.
Assembly Instruction:
Attach the front stabilizer (pt.15) to the main frame (pt.16) using two sets of Ø8 flat washers (pt.5), M8
domed nut (pt.6) and M8*52 carriage bolt (pt.3). Attach ther rear stabilizer (pt.4) to the main frame
(pt.16) using two sets of Ø8 flat washers (pt.5), M8 domed nut (pt.6) and M8*52 carriage bolt (3).

3. ASSEMBLY INSTRUCTIONS

Firmly tighten all component parts
and pre-assembled parts!
29
EN