Adjustment - SPORTSTECH SX200 Mode D'emploi

Emergency Brake Function:
The same knob that allows you to adjust the tension of the bike also doubles as the Emergency Brake.
Use this safety feature in any situation where you would need to get off the bike and/or stop the bike's
flywheel. To use the Emergency Brake function in any situation you would need it in, firmly press down
on the Emergency Brake & Brake Control Knob (#52).
• To adjust the seat height, slacken the spring knob on the vertical post stem on the main frame and
pull back the knob. Position the vertical seat post for the desired height so that holes are aligned,
then release the knob and retighten it.
• To move the seat forward in the direction of the handlebar or backwards away from it, loosen the
adjusting knob and washer and pull the knob back. Slide horizontal seat post into desired position.
Align holes and then retighten the adjusting knob.
• To adjust the handlebar height, slacken the spring knob and secondary knob and pull both knobs
back. Slide the handlebar post along the housing on the main frame to the desired height and, with
the holes aligned correctly, tighten the spring adjusting knob and then the secondary knob.

4. ADJUSTMENT

32