Care And Maintenance - Conrad AB 430 Notice D'emploi

• Make sure that the airbrush gun is always held at a right angle to
the object being sprayed.
• For fine details, reduce the spraying distance and decrease the
working pressure. For spraying large areas, increase the spraying
distance and raise the working pressure correspondingly. When
doing this, make sure that you do not exceed the recommended
maximum pressure. This can damage the airbrush gun.
• Guide the gun steadily and evenly over the object. Start the
spraying movement with the airbrush gun over the object before
actuating the trigger lever (4) and continue the movement after
you have released the trigger lever (4) for a short while.
• Do not let the trigger lever (4) snap forwards after the spraying action
is finished. This could damage the airbrush gun.
• Keep the pressure on the trigger lever (4) whilst releasing it for-
wards. This cleans the spray nozzle (3) of any residual paint,
which prevents paint blots occurring the next time you use the
airbrush gun.
• Wait a short while between each spraying action so that the paint
can dry slightly and not form drips.

Care and maintenance

Carefully clean the airbrush gun after each use. Nev-
er leave it lying around for a long time without clean-
ing it. Otherwise, the airbrush gun will become unus-
able.
Do not use mechanical force when cleaning the gun
because there are precision components that can
be damaged very easily.
Never pull the needle (8) out of its guide when there
is still paint in the airbrush gun. Otherwise, the air
valve will get clogged with paint and become unus-
able.
17