Kimberly-Clark PROFESSIONAL ICON Manuel D'utilisation page 6

Load New Roll
1. Load rolled towel into upper
roll holders.
Do not remove core plug.
Some towels will feed over the
top of the roll.
2. Lift the bronze loading bar and
place the leading edge of the
towel under the bar and on
top of the large black roller.
Have the towel extend up to 1"
inch in front of the bronze bar.
Release the front loading bar.
3. Press the sheet feed button
until towel exits the module.
4. Tear off any dispensed towel.
5. Close cover securely.
6. After 4 seconds, a sheet will
automatically dispense to
confirm proper loading.
1.
3.
5.
2.
4.
6.