Replace Batteries; Battery Information - Kimberly-Clark PROFESSIONAL ICON Manuel D'utilisation

Dispenser Access
1. To unlock the dispenser, insert
key into lock and rotate the
key one quarter turn towards
the wall. Gently pull the
cover forward.
1.

Replace Batteries

1. To load batteries, depress the battery lid tab
and lift upward.
2. Remove depleted batteries if present.
3. Insert new batteries ensuring polarity is correct.
4. Align tabs on battery cover to front of battery
compartment opening and push to engage.

Battery Information

• 4D type 1.5V alkaline batteries required.
(Batteries provided for initial installation.)
• Change all 4 batteries at the same time, do not
mix types or brand of batteries.
• Please follow the battery insertion instructions
ensuring polarity is correctly aligned.
• Used batteries are to be disposed of safely and
follow local environmental policy for disposal.
2. The key may be removed
at this point. The cover will
automatically open, do
not force.
2.
• Do not short circuit the supply terminals of
the battery or the dispenser.
• Non-rechargeable batteries are not to
be recharged.
• Remove batteries if stowed unused for an
extended amount of time.
3. To lock, close the cover.
The dispenser will lock
automatically without the key
if the lock is returned to the
lock position.
3.