Dangers Of Non-Compliance With The Safety Instructions; Safety Conscious Working; Safety Instructions For The Operator - evenes MMF 230.10.120 Manuel D'installation

2 | SAFETY INSTRUCTIONS

2.4 Dangers of non-compliance with the safety instructions

If safety instructions are not observed, this can result in a danger to people, the environ-
ment and the system. Non-compliance with the safety instructions leads to a loss of any
claim for damages. Possible hazards include:
• Danger to people due to electrical and mechanical influences.
• Failure of important system functions.
• Failure of prescribed repair and maintenance work.

2.5 Safety conscious working

The safety instructions listed in these instructions and also the existing national accident pre-
vention regulations are to be observed. Any internal regulations from the system operator are
also to be observed.

2.6 Safety instructions for the operator

any protection against touching moving parts may neither be removed from the system in
operation nor taken out of action.
Hazards from electrical energy must be ruled out. To this end, the regulations of the VDE
and the local energy supply companies are to be observed, among other things.
touch protections should be attached to any hazards on the system resulting from hot or
cold parts.
Keep easily flammable materials and products away from the product.
24 FIXED SETPOINT CONTROLLER MMF 230.10.120