Safety Instructions; General; Labelling Of Instructions In The Operating Instructions; Personnel Qualifications - evenes MMF 230.10.120 Manuel D'installation

2 | SAFETY INSTRUCTIONS

2.1 General

These installation and operating instructions are a component of the product and contain basic
information which must be observed during assembly, operation and maintenance. It is therefore
imperative that they are read by the technician and responsible specialist personnel or ope-
rators. Both the general safety instructions mentioned under point 2 and the security instructions
are to be observed.
A copy of the EC declaration of conformity is attached to these instructions.
Changes made without our consent invalidates the instructions.

2.2 Labelling of instructions in the operating instructions

General hazard symbol Warning! Danger of damage to people!
Observe the existing regulations regarding accident prevention.
Warning! Danger due to electrical voltage! Hazards due to electrical
are to be ruled out. Observe instructions in local or general regulations
(i.e. IEC, VDE etc.) and from local energy companies.
Here are useful instructions for handling the product. They draw
INSTRUCTIONS
attention to possible difficulties and should ensure safe operation.

2.3 Personnel qualifications

Assembly, operating and maintenance personnel must have the appropriate qualification. The
operator is to ensure the area of responsibility, responsibilities and personnel monitoring.
If personnel do not demonstrate the required knowledge, they must be accordingly trained or
instructed.
FIXED SETPOINT CONTROLLER MMF 230.10.120 23