General Specifications - quadient DS-100 Mode D'emploi

9. GENERAL SPECIFICATIoNS
This document covers specifications for general data (form and insert sizes, envelope speci-
fication and physical and electrical data). Separate specification documents are also avail-
able for Barcode Labels and OMR Marks.
Please note that stationery sizes and weights are stated as a guide; specific applications
may use stationery of a finish, rigidity, colour density etc. that are unsuitable and may not
function correctly. Where doubt exists, it is recommended that samples be provided to the
Technical Support department so that running tests can be carried out to simulate the job
requirement. If changes are then required, this can be established at the outset.
A range of special rollers and other document feeding aids exist which can often accommo-
date problem stationery that other inserter folders may not be able to. These can be ad-
vised upon by the Technical Support department.
46