Velux INTEGRA KUX 110 Notice D'utilisation page 8

Resetting
The products connected can be reset by removing the lid of the
power supply unit and pressing the RESET button for at least
5 seconds.
When resetting, the connection between the mains-powered
product and wall switch KLI 310/311/312/313 is deleted and a
new pairing of the two products is required. See
velux.com/integrasupport for further guidance.
Note: The connected products will run briefly back and forth in
random order to indicate that they are ready for pairing.
9 VELUX ®
min 5 sec
ENGLISH
Declaration of Conformity
We herewith declare that VELUX INTEGRA
KUX 110 (3UC B02)
is in conformity with the Radio Equipment Directive 2014/53/EU and
has been manufactured in accordance with the harmonised standards
EN 61558-2-16(2009), EN 61558-1(2005)+A1(2009),
EN 60335-1(2012), EN 62233(2008), EN 300220-2 v2.4.1,
EN 301489-1 v1.9.2, EN 301489-3 v1.6.1,
EN 55014-1(2006)+A1(2009)+A2(2011),
EN 55014-2(1997)+A1(2001)+A2(2008) and
EN 55024(2010).
When the above-mentioned power supply unit is connected to a
VELUX INTEGRA ® window operator or another VELUX INTEGRA
motor installed in a VELUX window in accordance with the instructions
and requirements, the total system complies with the essential require-
ments of the Directives 2006/42/EC, 2014/35/EU, 2014/30/EU and
2014/53/EU of the European Parliament and Council.
VELUX A/S: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Jens Aksel Thomsen, Market Approval)
Ådalsvej 99, DK-2970 Hørsholm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH
power supply unit
®
®
13.12.2017
CE DoC 940403-02
VELUX ® 10