Publicité
Les langues disponibles
Les langues disponibles
User manual
Connexion to a cable television distribution system
•
Make a connection from a free OUTPUT on the CATV distribution amplifier to the "TV+WWW" F
connector on the TEOC 211 adapter. It is essential that the first TEOC 211 adapter is only
connected to an OUTPUT port of the amplifier, as the Ethernet over coax signal cannot pass
through any amplifier.
At the second end where the Ethernet signal is wanted, you need to use a second TEOC 211
(without Wi-Fi extender) or to a TECW 211 (with build-in Wi-Fi extender). On this second device,
connect the "TV+WWW" F connector to the wall outlet (TV port).
To remake the connection to the TV or a DVB-T set top box, so that the signal is passing through
the TEOC 211 (or TECW 211), use the supplied coaxial fly lead between the TEOC 211 "TV" port
and your TV or STB.
Connect any Ethernet devices – Smart TV, Game console, Blu-ray player, IP Set top Box etc. using
the supplied Ethernet patch cord.
Power up the 2 TEOC 211 devices, the link between the devices is established automatically, this is
confirmed when the LED
is ON. (It may take a few minutes to link.). The cable or terrestrial
TV signal can be passed through the device.
If you have more devices to connect onto your network, repeat the second device operation.
The schematics below illustrate how to create your fist network. More schematics examples are
available on
www.triax.com
Once your network is set, the devices connected (see LED status), you shouldn't need to get
access to the TEOC 211 internal parameters. For experimented users or to do some special
settings (change of the frequency, have higher security, software upgrade), a tool called PC Tool to
configure the TEOC 211 is available on
www.triax.com
Please download this tool to do additional settings.
7
EN
Publicité
Chapitres
