Connectors And Led's - Triax TEOC 211 Guide D'installation

User manual

1.2 Connectors and LED's

Front panel
Power
Link between
devices
LAN 1 / LAN
Rear panel
DC 5V/2A
Switch
RESET
LAN 2
LAN 1
TV+WWW
TV
Solid Green
Off
Solid Green
Off
Solid Green
2 Blinking Green
Off
Plug in the supplied power supply 5V
Turn on/off the lamps in the front panel
Reset button
10/100/1000 Mbps, RJ45
10/100/1000 Mbps, RJ45
Offer TV + Ethernet signals to create the local network. See
connection examples.
TV+WWW connectors from several TEOC 211/TECW 211 need to
be connected together to create the private network.
Offer TV signals to be connected to TV set (output) or to the
terrestrial / cable arrival signal (input). See connection examples.
Device is ON
Device is OFF
Device is connected to another similar device
and a network is created
Device is NOT connected to another similar
device and a network is created
The Ethernet is plugged in and connected to
the network device
Receiving Ethernet traffic
The Ethernet is not plugged in
5 EN