Technical Data - Black & Decker FS1600 Mode D'emploi

ENGLISH
The Fan guard can also be positioned vertically
depending upon the direction of flow desired.
For this switch OFF the fan first, let the fan
come to halt, then with one hand hold the stand
and with the other hand, move the guard
assembly up or down depending upon the
desired angle required. To make the fan
oscillate pin down. To make it stop oscillation,
pull it up.
Warning !
•
Never use the fan without the guard in place
or if the guard is damaged.
•
Do not touch moving parts
•
Always allow motor to stop before approach-
ing the blades or changing an accessory.
•
Keep your fingers, long hair, loose clothes
and supply cord away from moving parts.
•
Never pull the power cord to disconnect the
plug from the socket.
•
Keep the power supply cord away from
heat, oil and sharp edges.
6
•
Do not place the appliance on or near heat
source or in a heated oven
•
Do not use the appliance outdoors. Always
protect the motor unit from water or
excessive humidity
•
Operate the appliance only with dry hands.
•
If the power supply cord is damaged during
use, disconnect the appliance from the
power supply immediately . Do not touch the
power supply cord before disconnecting
from the power supply.
•
When not in use, the
appliance should be
stored in a dry place.
Children should not
have access to stored
appliance.
•
Do not cover the rear
housing of the fan with
any cloth or curtain.
•
Do not operate this unit in tropical climate or
in areas where the temperature exceeds
40ºC.

Technical Data

Voltage
Power input
Weight
220 – 240V ~ 50Hz
60W
8.7kg