Symbols And Their Meanings; Detailed Description - Bosch PFS 5000 E Notice Originale

20 | English
Take note of possible risks posed by the spray mater-
u
ial. Observe the markings on the container or the man-
ufacturer's information regarding the spray material,
including the instructions about using personal pro-
tective equipment. You must comply with the manufac-
turer's instructions in order to reduce the risk of fire and
of injury caused by poison, carcinogens, etc.
Keep the mains plug and the spray system trigger
u
switch free from paint and other liquids. Never hold
Symbols

Symbols and their meanings

"Wood/glaze" applica-
tion:
The fine-spray system is
Spraying glazes and
suitable for glazes and
primers
lacquers and for wall
paints.
Choose the grey nozzle
cap (11) for the "wood/
glaze" application
Step 1:
Choose the correct
nozzle cap
Select setting 1, 2 or 3
on the thumbwheel (4)
for the "wood/glaze" ap-
plication
1 609 92A 686 | (17.06.2021)
the cable by its plug connection for support. Doing this
could cause electric shock.
Supervise children. This will ensure that children do not
u
play with the fine spray system.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
The sticker regarding operation of the fine-spray system is located on the
base station. The correct interpretation of the symbols helps you operate the
fine-spray system better and more safely.
"Wood/lacquer" ap-
"Wall" application:
plication:
Spraying emulsion and
Spraying solvent-based latex paints
and water-dilutable lac-
quers, clear lacquers
and oils
Choose the black nozzle
Choose the white nozzle
cap (12) for the "wood/
cap (10) for the "wall"
lacquer" application
application
Select setting 1, 2 or 3 Select setting 4 or 5 on
on the thumbwheel (4) the thumbwheel (4) for
for the "wood/lacquer" the "wall" application
application

Detailed description

(see "Intended Use",
page 21)
(see "Changing the
nozzle cap (see
figures B1–B2)",
page 22)
(see "Setting the spray
material quantity (see
figure J)", page 24)
Bosch Power Tools