Phocos CIS-N-LED-350 Guide De L'utilisateur page 27

This day/night threshold can be adjusted by programming according to local light conditions
and the solar array used.
Testing Function
By pushing the "Test Button" on the CIS-CU-LCD (control unit), the LED-driver will be switched "on"
for one minute.
If pressing the button causes a load disconnect event (LVD/SOC, overcurrent) the load
will be switched off immediately.
Safety Features
Reverse
Protected (1)
polarity
Short circuit (2) Protected
Overcurrent N/A
Reverse current Protected (4)
Overvoltage Max. 50 V (5)
Protected (1)
Protected (3)
N/A
N/A
Max. 36 V
25
N/A Protected
Not protected Protected
N/A N/A
N/A N/A
Switches off Max. 30V
above 15.5/31.0 (50V short
V battery voltage time)