EN
30
INSTALLATION
After unpacking the product, check for any damage during transport. In case of
problems, contact costumer service.
Built-in Dimensions and Minimum Distances
Note: The distance between the underside of the appliance and the separator panel
must respect the dimensions given in the figure (min. 50 mm).
• In order to ensure the correct operation of the appliance, do not obstruct the
minimum required clearance (min. 20 mm) on the worktop for air flow out.
• If an undertop oven is installed, make sure the oven is equipped with a cooling
system.
• Do not install the hob above a dishwasher or washing machine, so that the
electronic circuits do not come into contact with steam or moisture which could
damage them.