Fault Rectification - Maico AE 10 Instructions De Montage Et Mode D'emploi

9. Maintenance
The unit is maintenance-free.
10. Cleaning
Danger to life. Unit is
powered up.
 Switch the mains fuse off.
DANGER
 Clean unit with dry cloth only.

11. Fault rectification

● Call on the services of a trained electrician
any time there is a fault.
● Repairs should only be carried out by a
trained electrician.
Danger to life. Unit is
powered up.
 Switch off mains fuse before
DANGER
working on electrical
connection.
Fault
Operating
indicator light off.
Lamella not
opening or
closing.
Cause / Measure
No mains voltage.
 Check whether the
mains fuse has failed.
Switch on if necessary.
 If the fault persists:
contact an electrician.
Lamella very dirty or
blocked.
 Clean lamella
according to section 10.
 Check whether there is
anything between the
lamella.
Remove if necessary.
 If the fault persists:
contact an electrician.
12. Dismantling
Danger to life from electric
shock
 Dismantling may only be
DANGER
undertaken by an electrician.
 Switch off mains fuse before
removing.
Danger of burning if bimetal
is too hot.
 Bimetal is very hot once the
CAUTION
opening or closing function
has been used. Do not touch.
13. Disposal
Do not dispose of in domestic
i
waste.
The unit contains in part material that
can be recycled and in part
substances that should not end up as
domestic waste.
 Dispose of the unit once it has reached the
end of its working life according to the
regulations valid where you are.
GB
11