Service Parts - Broan 345GOBK Manuel D'utilisation

TYPCAL
#10 x 1" PANCAKE HEAD
WOOD SCREW ATTACHED
TO NOMINAL 1/2"
PLYWOOD DECK
SOLAR PANEL
1" NOMINAL
7"
FROM EDGES
8. Run a bead of silicone or roof cement around the
perimeter of the underside of the solar panel and secure
to the roof using galvanized #10 x 1" pancake head wood
screws. Install screws per illustration. Seal the screw
heads with silicone or roof cement.
9. From inside the attic, apply silicone around the wire
where it enters the roof.
10. Connect the red wire to the negative motor terminal and
the black wire to the positive motor terminal. Tape or tie
extra wire to prevent contact with the fan blade.
11. Remove cardboard from the solar panel and verify that
the ventilator operates.
Key
No.
1
2
3
4
5
6
1" NOMINAL
FROM EDGES
6"
6"
26-5/8"
6"
6"
1" NOMINAL
7" 7" 7"
FROM EDGES
30"
Model
345GOBK
(Black)
77001317
CWT45
79020041
79080082
77001285
79770013
MODELS 345GOBK • 345GOWW

SERVICE PARTS

6
2
Replacement parts
can now be ordered
on our website.
Please visit us at
www.Broan.com
Model
345GOWW
(Weathered Wood)
77001318
CWT45
79020041
79080082
77001286
79770013
4
Description
Solar Panel Assembly
Thermostat (Optional)
Fan Blade w/ Set Screw
Motor, DC
Roof Sheet Panel
Remote Control Wire Harness
Page 3
1
3
5