Proline BL800 CORE Mode D'emploi page 9

5. Attach the lid to the dust tank by turning it clockwise.
6. Put the dust tank back into the appliance until it snaps
home, making sure the opening on the dust tank is
aligned with the air inlet.
Cleaning the air outlet filter
The air outlet filter is located at one wheel
of the appliance.
Turn the filter cover anticlockwise to
remove the filter cover.
Power cord rewinding
When not in use, unplug the appliance from the mains socket and then press the cord rewind button to
feed back the power cord.
CAUTION: Take special care to rewind the mains cord by holding the plug to avoid injury by a whipping
action.
Storage
Remove the air outlet filter. Wash the filter
and cover under running water. Allow the
filter and cover to dry completely before
replacing them in the appliance.
The cleaner can be stored upright on its base.
Insert the holder of the floor brush with tubes into the storage
clip at the rear of the appliance.
7 7
EN