Proline BL800 CORE Mode D'emploi page 6

Connecting tubes and accessories
1. Attach the hose handle into the tube by inserting the handle into the bigger end of one tube.
2. Connect the tube to the other one.
• Push forward the switch on the tube then adjust. Release the switch until the desired length is
achieved.
3. Attach the desired cleaning accessory to the end of the tube.
To remove the tubes and accessory, hold each piece tightly and pull firmly apart.
OPERATION
1. Pull the power cord out of the appliance and insert the
mains plug into the mains socket.
• A YELLOW mark on the power cord indicates the ideal
cable length. Do not extend the power cord beyond the
RED mark.
2. Press the power button on top of the appliance to
switch on the appliance.
3. You can quickly reduce the suction power by pushing
the air flow regulator on the hose handle.
Push it forward, suction power will increase; push it
backward, suction power will reduce.
Air flow regulator
4
EN