Proline BL800 CORE Mode D'emploi page 10

TROUBLESHOOTING
Please check the following details before you have your appliance repaired by an
authorised servicing agent.
Problem
Vacuum cleaner does not
work.
Suction power
becomes weak.
Power cord will not fully
feed back.
Power cord can not be
pulled out.
SPECIFICATIONS
Ratings: 220V-240V~ 50/60Hz
800W
DISPOSAL
As a responsible retailer we care about the environment.
As such we urge you to follow the correct disposal procedure for the appliance and
packaging materials. This will help conserve natural resources and ensure that it is
recycled in a manner that protects health and the environment.
You must dispose of this appliance and its packaging according to local laws and
regulations.
Possible Cause
1. Check if the power plug
is firmly inserted into the
power outlet.
2. Check if the power
button of the appliance is
pressed.
1. Check if the hose, brush
or tube is clogged or
damaged.
2. Check if the dust tank is
full.
3. Check if the filter is
clogged, the tube is
correctly attached.
Check if the power
cord is twisted.
The power cord may be
twisted.
8
Possible Solution
1. Insert the plug back into
the power outlet and
ensure it is switched on.
2. Press the power button
to turn on the vacuum
cleaner.
1. Immediately remove the
obstruction.
2. Empty the dust tank.
3. Clean the filter or
reassemble the tubes.
Pull out the power cord at
its optimal length and
rewind it.
Rewind or pull the cord in
and out several times by
pressing the cord rewind
button.
EN