Before Use; Filter Installation - Coway airmega AP-1512HHS Mode D'emploi

BEFORE USE

PLEASE CHECK BEFORE USE!
The product is for 120 V~, 60 Hz only.
Make sure to connect the power plug to a grounded electric
outlet (120 V~, 60 Hz) dedicated to the product.

FILTER INSTALLATION

- Make sure to remove each filter's plastic packaging before installing filters.
- The product is for household use. Use the product indoors only.
- When the product is not in use, remove the power plug from the electric outlet.
- When installing filters, check that the front side of filters is in the correct
Tips
direction.
▶ Order of filters : Max2 filter(True HEPA
1. Open the front cover.
To open the front cover, pull the upper
part of the cover to reveal the filters.
2. Take out filters and remove the plastic bag.
Remove the plastic packaging of the filters and install the filters by proper order.
3. Install the filters as following
order: Max2 filter (True HEPA
Activated Carbon) Pre-filter
When installing the pre-filter, make sure
to push the clip firmly until you hear a
click.
Activated Carbon) Pre-filter
9
10