Cleaning And Care - Beem 03997 Mode D'emploi

23
The programme can be aborted at any time by pressing the relevant programme
button. For example, if the programme button
again to abort the programme prematurely.
8. Remove the mains plug from the plug socket after use.
9. Carefully remove the milk container from the base station.
10. Take the lid off the milk container and transfer the heated milk or the milk froth to a
suitable vessel.

Cleaning and Care

NOTES
• Before commencing the cleaning, note the safety instructions in the
"Safety Instructions" chapter!
• Clean the device after each use to prevent the formation of germs.
• The device and accessories are not dishwasher-safe!
• Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges
to clean the device. These can damage the surface.
1. Empty the milk container (5) if necessary.
2. Remove the insert from the mount at the bottom of the milk container.
3. Wipe down the housing of the milk container and the base station (3) with a damp
cloth. If necessary, use a little mild detergent to remove more intense soiling.
4. Clean the milk container with warm water and mild detergent.
IMPORTANT! The base of the milk container must not be immersed in water in the
process!
5. Clean the lid (6) and the used insert with warm water and mild detergent. For more
thorough cleaning, detach the ring from the whisking insert (8).
When the ring is reattached to the whisking insert, make sure that the ring fi ts
completely in the groove of the whisking insert (Picture C1 and C2)!
6. Dry all parts properly before the device is reassembled and / or stored away.
7. Check the mains cable regularly for any damage.
Storage
Store the device and all accessories in a dry, clean, frost-free place that is protected from
direct sunlight and cannot be accessed by children or animals.
03997_DE-EN-FR_NL_A5_V1.indb 23 03997_DE-EN-FR_NL_A5_V1.indb 23
(4) has been pressed, press it
EN
13.10.2017 14:20:56 13.10.2017 14:20:56