VALBERG DC 8 B W566C Consignes D'utilisation page 12

C
Useful information
1. Unlock the maintenance cover.
2. Open the maintenance cover completely.
3. Screw both locking levers towards each other.
4. Remove the condenser.
20 EN
C
Useful information
5. Thoroughly clean the condenser and leave it to drain
completely.
6. Clean the seals.
7. Reinsert the condenser using the button.
8. Unscrew both blocking levers.
9. Close the maintenance cover until it clicks into place. If
you use the dryer regularly, clean the condenser every three
months. Take care not to damage the condenser!
CAUTION:
• Clean with water only and do not use any objects with
sharp edges.
Never use the machine without the condenser!
• During the drying cycle, water may build up between
the window and the door seal. This does not affect the
operation of your dryer!
Empty the water tank
1. Hold the water tank with both hands and pull it towards
you.
2. Tilt the water tank to pour out the condensed water.
3. Re-insert the water tank.
21 EN