Useful Information; Care And Maintenance - VALBERG DC 8 B W566C Consignes D'utilisation

C

Useful information

Care and maintenance

Cleaning the lint filter
Let the dryer cool down.
1. Open the door.
2. Pull the lint filter upwards to remove it from the machine.
3. Clean the lint filter: remove residues from the lint filter by
hand or rinse it with water, and dry it thoroughly.
4. Replace the lint filter.
18 EN
C
Useful information
NOTE:
• The residues that build up on the lint filter prevent air
from circulating, which increases the drying time and
energy consumption; this is why the lint filter should be
cleaned after each use.
• Before cleaning, unplug the power cord!
• The dryer should never be operated without its filter!
• Clean the lint filter after each use to prevent residues
from building up inside the dryer.
Wash air condenser
Let the dryer cool down.
Residual water may run out. Place an absorbent cloth under
the maintenance cover.
19 EN