Specific Safety Rules; Appliance Specifications; Technical Characteristics; Maintenance / Cleaning - Inspire Nashi Notice De Montage

FR

3. SPECIFIC SAFETY RULES

ES
PT
Min: 2,3 m
IT
EL
4. ENVIRONMENTAL PROTECTION
CAUTION!
PL
RO
EN

5. APPLIANCE SPECIFICATIONS

TECHNICAL CHARACTERISTICS

Rated voltage
Rated frequency
Rated wattage
Bulb type
Protection
IP number
Weight
Frequency band
Maximum frequency power
This product contains a light source of energy efficiency class D - (EU) 2019/2015

6. MAINTENANCE / CLEANING

Alway disconnect the appliance before cleaning or doing maintenance.
Never use a wet sponge to clean the appliance.
In order to not damage the product,it is advisable to use adapted equipment to the fragile surfaces and products slowing the wear
on the appliance.
26
Min: 0,6 m
Electrical products must not be thrown out with domestic waste. They must be taken to a communal
collecting point for environmentally friendly disposal in accordance with local regulations. Contact
your local authorities or stockist for advice on recycling.
The packaging material is recyclable. Dispose of the packaging in an environmentally friendly
manner and make it available for the recyclable material collection-service.
The fan base mounting bracket can support a load of 36 kgs.
The fan is to installed so that the blades are more than 2,3m above
the floor and the blades distance to wall min 0.6m.
220V-240V
50Hz
10W fan
LED 18W
class I
IP 20
5,3kg
433,89Mhz
-27 dBm