Unit Installation - HTW UAN -CLE-11NOXUAGLP-K Manuel De L'utilisateur Et D'installation

2.5 Internal cable diagram
Ignition Pin Connection

3. UNIT INSTALLATION

3.3 Modes of installation
The combustion air intake grille should be located in a well ventilated place. To prevent corrosion, the
combustion air must be free of aggressive substances. Aggressive substances are halogenated
hydrocarbons that contain chlorine or fluorine. These substances are found in solvents, paints,
adhesives, gases or liquid propellants and household cleaners. If these conditions cannot be
guaranteed, another location should be chosen for the air intake.
AC motor connection
screen
Connecting the water flow sensor
Induction pin connection
Ground wire
8
Valve switch connection
Gas proportional valve connection
Valve switch connection